Print Page | Close Window

Dash fastening and removal on 2009+ v drives Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51610 Printed Date: September-16-2024 at 3:49pm Topic: Dash fastening and removal on 2009+ v drives Posted By: kylem428 Subject: Dash fastening and removal on 2009+ v drives Date Posted: June-10-2024 at 7:13am I have an ‘07 236 and just installed Max Gills NSS retrofit. While I had the dash apart I thought I’d freshen it up with some dupli color vinyl paint since it was fading bad. As you may know the 2007 models have the 4-piece dash which is attached with a mix of a few bolts and mostly Velcro. In any case, the paint didn’t work and cracked really bad when the dash pieces bent. I don’t want to put them back on since they look like crap, so I’m going to update to the 2009/10 single pod style. Can anyone provide any insight on how the 2009+ vdrive dash pods are attached to the fiberglass helm base? Do they use the Christmas tree fastener type? I tried to search but couldn’t find anything and am trying to plan my attack since I don’t want this project to take a week once the parts get here. Thanks for any insight! Kyle

Print Page | Close Window