Core plug part number?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51659
Printed Date: November-21-2024 at 10:14pm
Topic: Core plug part number?
Posted By: AlfaDon
Subject: Core plug part number?
Date Posted: July-01-2024 at 2:33pm
|
Hi, Does anyone have the part number for the core plugs on the outside of the exhaust manifolds on a GT-40 engine? There are 2 of them on each manifold. They measure appx 1.125" and I can find them in that dimension. From what I've read they are placed in the hole against a shoulder and then you dimple the convex side. Do I order the exact size on the opening? Thanks, Don
|
Replies:
Posted By: TRBenj
Date Posted: July-01-2024 at 3:27pm
| Might want to mention what brand of manifold… doesn’t sound like a PCM. |
Posted By: AlfaDon
Date Posted: July-01-2024 at 4:08pm
|
Thanks Tim. I figured GT-40 would be enough. It's a PCM 5.8 late 90's vintage. Manifold is an RO28001 I believe I've found a Melling MEP-10B that should work. I'll report back tomorrow. Thanks, Don
|
Posted By: TRBenj
Date Posted: July-01-2024 at 4:35pm
| Got a pic? Have never seen a pcm manifold with core plugs like you describe, GT40’s included. Sounds like an osco or Barr replacement? |
Posted By: AlfaDon
Date Posted: July-01-2024 at 4:58pm
|
Hey Tim, You're right, it is an Osco. I guess I wasn't paying attention. Thanks
|
Posted By: KENO
Date Posted: July-01-2024 at 5:06pm
|
Here's a link to a thread with some pictures from a few years ago. . http://www.correctcraftfan.com/forum/forum_posts.asp?TID=50265&PN=1&title=time-for-new-manifolds" rel="nofollow - link Here's one picture from that thread. Old original on the left, new from Nautiqueparts on the right with PCM cast in the corners  Flyweed bought new 351 PCM manifolds that didn't have the raised lettering from Nautiqueparts. They did say PCM on them and they had 2 plugs like Don mentions. NP told him it was from a new different supplier The PCM is cast into them Later in the same thread, Tomahawk bought the same thing too. |
Posted By: AlfaDon
Date Posted: July-01-2024 at 5:22pm
|
I remember my old manifolds were like the one’s Keno posted. I remember that they had stickers on the raised lettering :) |