any idea what this goes to?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51734
Printed Date: January-15-2025 at 7:09am
Topic: any idea what this goes to?
Posted By: MorningGlass
Subject: any idea what this goes to?
Date Posted: August-16-2024 at 6:12pm
|
Hey, a few weeks ago when I was trying to troubleshoot fuel problems on my 1996 ski nautique, I removed the rear seat, engine cover and the section of floor in the back so I could check the pickup tube in the fuel tank. When I pulled out the floor section I found this bolt/fitting sitting in the bottom of the hull next to the big exhaust pipe that runs rearward to where it exits the hull. I couldn't see anything in the immediate area that it obviously came off of but it's pretty substantial, the threads on it are 1/2 - 13. If it looks familiar, please let me know.  |
Replies:
Posted By: andrewmarani
Date Posted: August-17-2024 at 10:30am
|
Nothing I recognize but from the way that bolt is either welded or corroded to the plate it hasn't moved in a long time. I would look around for a nut and washer in the same area or on the other side of a stringer. ------------- Builder |