Observer seat hinges 1989
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51764
Printed Date: September-19-2024 at 6:03pm
Topic: Observer seat hinges 1989
Posted By: Netdewt
Subject: Observer seat hinges 1989
Date Posted: September-11-2024 at 7:21pm
|
Hi All. I’ve seen some old threads asking about this. Anyone have 2024 info or source for observer seat hinges? I’m getting my seats reupholstered and the hinges are super bent up and it seems wrong to remount the new seat on them. ------------- 1989 Ski Nautique 2001, 940 hours |
Replies:
Posted By: andrewmarani
Date Posted: September-12-2024 at 3:06pm
|
Have not bought these since my 86 silver nautique hinges are in good shape. But these look like an exact match for them. Not sure if it's the flat mount or the 90 degree mount hinge and can't check since the boat is on a lift at the shore but you should be able to tell. https://www.bosunsupplies.com/hinges-hatch/" rel="nofollow - https://www.bosunsupplies.com/hinges-hatch/ Thanks Andrew ------------- Builder |
Posted By: Netdewt
Date Posted: September-17-2024 at 8:38am
|
Not those. I mean the cantilever type hinge on the back of the observer seat, that gives better access to the bow storage area. https://ibb.co/zFcL37s" rel="nofollow">  I tried contacting Tim from this post with no luck yet. https://www.correctcraftfan.com/forum/forum_posts.asp?TID=16911&title=1989-ski-nautique-seat-brackets" rel="nofollow - https://www.correctcraftfan.com/forum/forum_posts.asp?TID=16911&title=1989-ski-nautique-seat-brackets There are lots of other threads too, but I have not seen a solution yet. There has to be someone else that has figured this out! https://www.correctcraftfan.com/forum/forum_posts.asp?TID=49123&title=1988-2001-observer-seat-hinge" rel="nofollow - https://www.correctcraftfan.com/forum/forum_posts.asp?TID=49123&title=1988-2001-observer-seat-hinge ------------- 1989 Ski Nautique 2001, 940 hours |
Posted By: andrewmarani
Date Posted: September-17-2024 at 9:03am
|
Yep, read that wrong, I was thinking of the back seat for some reason. Mine were bent as well though not that badly. I pounded them straight and added screws to the top holes on each hinge since that's were the force seems to be causing the bend. ------------- Builder |