2nd Battery Box install 2001
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51780
Printed Date: November-30-2024 at 5:33am
Topic: 2nd Battery Box install 2001
Posted By: 99airwarrior
Subject: 2nd Battery Box install 2001
Date Posted: September-21-2024 at 11:37pm
| Hi I Purchased a 2nd battery box out of a 84 2001 I am going to install it in my 85 2001. I had seen a picture of a 84 a while back and now I can not find it. Does anyone have a picture and also recommendation of a location in the floor where it would not compromise the strength of the floor. Thank You |
Replies:
Posted By: wayoutthere
Date Posted: September-22-2024 at 8:30am
|
Heres my 84, https://ibb.co/w7hvTbv" rel="nofollow">  https://ibb.co/wpWdSkZ" rel="nofollow"> 
|
Posted By: wayoutthere
Date Posted: October-02-2024 at 7:54pm
https://ibb.co/NmjRfFM" rel="nofollow"> https://ibb.co/tZKG44G" rel="nofollow">  https://ibb.co/fSZqFsW" rel="nofollow">  https://ibb.co/tD2Tk9s" rel="nofollow">  Somebody asked about the 84 2001 battery/cooler hatches, said i'd measure it tuesday, here ya go. The wood panels measure, 15 7/8 inches X 11 inches, they are 3/4 plywood, the trim lip is 1/4 inch and rhe radius is 3 1/4 inches |