Electrical Work 2003 SANTE
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51812
Printed Date: January-15-2025 at 10:21am
Topic: Electrical Work 2003 SANTE
Posted By: Rob-Man
Subject: Electrical Work 2003 SANTE
Date Posted: October-28-2024 at 2:33pm
|
The auto bulge pump is not working, I live in St. Louis. Does anyone out there know anyone close who can work on it?
|
Replies:
Posted By: fanofccfan
Date Posted: October-29-2024 at 8:11am
Have you checked anything obvious like voltage? Does it work in manual? Is something lodged under the float switch?
-------------
2004 196 LE Ski 1969 Marauder 19 1978 Ski
|
Posted By: Fl Inboards
Date Posted: October-29-2024 at 9:55am
there is not a float switch under those bilge pumps unless someone has replaced it. Nautique utilizes an automatic pump that cycles every few mins, if there is not any load on the pump it shuts right off. Check voltage on the brown wire. if you have 12 volts there and the pump is not cycling it will need replaced. here is the link for the replacement. https://nautiqueparts.com/bilge-pump-automatic-most-models/
-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
1993 Shamrock "fat" 20. 2008 Nautique 196 5.0
|
|