PCM vs Ford
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=5464
Printed Date: February-21-2025 at 9:21am
Topic: PCM vs Ford
Posted By: skibama
Subject: PCM vs Ford
Date Posted: January-05-2007 at 7:29pm
|
I know this is probably a stupid question to someone in the know.I need to replace my valve cover gaskets on 351 PCM would I be able to go to a parts house and get gaskets for a 351 Ford and be right.
|
Replies:
Posted By: GottaSki
Date Posted: January-05-2007 at 8:10pm
correct
-------------
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole
|
Posted By: Gary S
Date Posted: January-05-2007 at 10:06pm
The only thing different that I have found is the PCM ones have a metal spacer in the hold down holes so when you tighten the cover you don't crush the edge of the valve cover.The generic ones I have bought don't have these and you can over tighten and bend the edge of the cover.Not a problem if your careful.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
|