re-wiring guages and ignition
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=5513
Printed Date: January-17-2025 at 9:05am
Topic: re-wiring guages and ignition
Posted By: doug e
Subject: re-wiring guages and ignition
Date Posted: January-13-2007 at 7:31pm
I am looking for a wiring harness for my guages and ignition with a rectangular motor plug. Dose anyone know were or how they are sold.
Thanks
-------------
Cheap thrill fishing team
|
Replies:
Posted By: SkiBum
Date Posted: January-13-2007 at 9:18pm
http://www.eastwoodco.com/jump.jsp?itemID=61&itemType=ConTENT - Painless Wiring Harness
These guys have a variety of wiring harnesses, none specifically for marine applications but you might be able to find something that would work.
I rewired my dash and ignition using the old plugs. After identifying each wire I cut them out and soldered new wires in place covering them with heat shrink.
-------------
Bill
http://www.freewebs.com/billsboatworks - http://www.freewebs.com/billsboatworks
www.freewebs.com/billsboatworks 1987 SN Rebuild Project
|
Posted By: doug e
Date Posted: January-14-2007 at 8:33am
I thought about that, but half of the wire are corroded off and have no idea were they came from. Thanks for the site, I'll give them a look..
-------------
Cheap thrill fishing team
|
Posted By: 79nautique
Date Posted: January-16-2007 at 12:21pm
I have an extra wiring harness if you still need one. What year boat is it?
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique
|
Posted By: doug e
Date Posted: January-16-2007 at 1:48pm
I found one thanks
-------------
Cheap thrill fishing team
|
|