Exhaust gasket PCM 351
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=6176
Printed Date: November-30-2024 at 5:59pm
Topic: Exhaust gasket PCM 351
Posted By: DESSER.dk
Subject: Exhaust gasket PCM 351
Date Posted: April-01-2007 at 10:10am
I am going to change my bolts in the exhaust manifolds. The bolts are nearly gone...so its not easy.
Maybe I have to cut the bolts away, remove the manifold, get the bolts out and then put on a new exhaust gasket.
My question is: can I use a exhaust gasket from a 351 Ford car motor ?? (my motor is PCM Ford 351 1996 , with GT heads 285 HP and no injection).
I live in Copenhagen Denmark and have to get parts from CC England or USA, and it would be far easier to buy one in a car shop in Copenhagen if it fits.
Best regards,
Jens Chr Nielsen
Copenhagen DK
-------------
jens c
|
Replies:
Posted By: GottaSki
Date Posted: April-02-2007 at 11:18am
Most any 302/351W gasket should be fine, Jens
-------------
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole
|
Posted By: AWhite70
Date Posted: April-02-2007 at 11:25am
I've used automotive exhaust manifold gaskets before without issue. If there are differences between auto and marine I'm not sure what they are.
-------------
AWhite70
http://www.correctcraftfan.com/diaries/details.asp?ID=562&sort=revyear&pagenum=5&yrstart=1976&yrend=1980" rel="nofollow - '79 Ski Nautique
|
Posted By: 87BFN owner
Date Posted: April-02-2007 at 8:03pm
The difference is the price, the material I believe is all the same. No physical diff.
-------------
|
|