Keyless ignition issue
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=6257
Printed Date: January-17-2025 at 6:02pm
Topic: Keyless ignition issue
Posted By: wakeboardin2k4
Subject: Keyless ignition issue
Date Posted: April-09-2007 at 7:14pm
So my new keyless igntion says that you can hook up the ignition module to the tachometer in order to prevent accidental abuse of the starter by pressing the start button by accident. Well my tach has 3 wires going to it, a purple one on the left, grey in the middle, and black on the right. Anyone have an idea of which one i should try and hook up to the module? 
 ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |
Replies:
Posted By: Bremsen
Date Posted: April-09-2007 at 7:35pm
|
I'm pretty sure you want the grey one. Black is ground and purple should be switched ignition. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=923&sort=&pagenum=3&yrstart=1986&yrend=1990 - Our 88 SN2001 |
Posted By: wakeboardin2k4
Date Posted: April-09-2007 at 7:52pm
|
ok. Thats what i figured cause when i wired the module to the original ignition wires i had red +, black -, and purple which i figured was related to the 12 volt ignition. ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |