Print Page | Close Window

Gauge size in ’86 2001 Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=632 Printed Date: September-16-2024 at 3:46pm Topic: Gauge size in ’86 2001 Posted By: SunOrSnow Subject: Gauge size in ’86 2001 Date Posted: July-15-2004 at 2:07am Hello, Does anyone know what size the clock gauge is in a '86 2001? My boat is nowhere close and I'm looking at a 2-1/8" depth finder to replace the dead clock in the dash and was wondering if it would fit. Both the brochure and wiring diagram on this site don't give the hole size. (great resources otherwise though!) Thanks in advance for reading and any replies. Gordon ------------- '86 Silver Nautique 2001 Replies: Posted By: Rob86 Date Posted: July-15-2004 at 12:58pm I put a Hummingbird in the clock spot and glued the transponder to the hule under the motor and it works great. The hole size is 2 1/8". Good luck. Rob 86 SN Posted By: SunOrSnow Date Posted: July-15-2004 at 3:21pm Thanks Rob! ------------- '86 Silver Nautique 2001

Print Page | Close Window