Carter Carb
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=73
Printed Date: November-21-2024 at 2:38pm
Topic: Carter Carb
Posted By: Guests
Subject: Carter Carb
Date Posted: January-04-2004 at 2:27am
Hi,
Does anyone know where I can pick up a used Carter Carb for a 1972 Mustang.? Mine is missing and was replaced with an Edelbrock that does not fit the manifold properly. Thanks very much!
Jerry
|
Replies:
Posted By: tryan
Date Posted: January-04-2004 at 2:59am
i don't know of any 'used' ones, but napa has a few. tell me what motor you have and i can look up the part #. i think carter is owned by weber which is owned by edlebrock. damn vicious cycle.
from your other post..... yes, i would get cc'c blessing. i have one old style and one new style of the cc metal script.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=146&yrstart=1971&yrend=1975 - promo http://www.correctcraftfan.com/diaries/details.asp?ID=192&yrstart=1925&yrend=1970 - #2
|
Posted By: Lakeview
Date Posted: January-06-2004 at 11:31pm
Carter is long gone-found that out trying to locate a single bbl.for my 67 mustang.I found a great rebuild shop in Fla.and they guarantee their work,If you absolutely want to go new-don't put anything other than a Holley on it.
-------------
Lakeview
1992 Barefoot Nautique
1967 Barracuda SS
1967 Chris Craft Cavalier
|
Posted By: reidp
Date Posted: January-07-2004 at 12:56am
I might have missed some other posting(s) regarding your boat, but I guess it's a Chrysler 318 engine, as they were the only ones I know that used that carb? I've got several Carter AFB marine carbs which came off slightly earlier model 318's and which I am willing to sell. But you should be able to locate a good used aluminum intake from Edelbrock, Offy, Holley, etc., for hardly any more than a good carb, and maybe pick up a horse or 2, and which should work good with the Edelbrock carb, as long as they're both square bore patterns. Check e-bay for them.
-------------
ReidP
/diaries/details.asp?ID=231&yrstart=1971&yrend=1975 - 1973 Mustang
|
Posted By: 64 Skier
Date Posted: February-15-2004 at 4:57am
My Ford 289 had a Carter on it.
It's a 2BBL if your interested.
-------------
64 Skier
66" HO VTX and 67" HO Triumph
http://www.correctcraftfan.com/diaries/details.asp?ID=1071&sort=&pagenum=3&yrstart=1971&yrend=1975 - 71CC
|
|