72 correctcraft mustang raw water pump
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=7564
Printed Date: November-19-2024 at 6:21pm
Topic: 72 correctcraft mustang raw water pump
Posted By: Wally Saunders
Subject: 72 correctcraft mustang raw water pump
Date Posted: July-18-2007 at 2:18pm
I have a 72 correctcraft mustang with the HMH 302 motor and I need a raw water pump.My boat has the regular water pump like a car and the jabsco pump too. Has any one heard of this or have a pump.
Thanks
Wally
-------------
72 mustang
|
Replies:
Posted By: boat dr
Date Posted: July-18-2007 at 2:23pm
wally, is your raw water pump driven by a belt or is it crank driven? If possible shoot a pic so we know what pump we are talking about.Yours could be one or the other...............boat dr
-------------
boat dr
/diaries/details.asp?ID=4631 - 1949 Dart
/diaries/details.asp?ID=1533 - 1964 American Skier
|
Posted By: Wally Saunders
Date Posted: July-18-2007 at 2:50pm
It is crank driven.
-------------
72 mustang
|
Posted By: boat dr
Date Posted: July-18-2007 at 4:47pm
Wally, there is good news and bad news. The pump is NLA,but there is a co. that rebuild it to new specs. Give me a call and will point you in the right direction......
Boat Dr 1-318-386-2825
-------------
boat dr
/diaries/details.asp?ID=4631 - 1949 Dart
/diaries/details.asp?ID=1533 - 1964 American Skier
|
Posted By: Wally Saunders
Date Posted: July-18-2007 at 6:00pm
Thank you to the Boat Dr. I will have my water pump fixed in a few weeks and up graded my ignition. Nice boat and web site.
Thanks,
Wally
-------------
72 mustang
|
Posted By: nautique frk
Date Posted: July-20-2007 at 1:44am
Are you sure that jabsco does not make the pump any longer ? I was looking at a Jabsco catalog the other day and found the one for Holman Moody listed. I will see if I can find it again and give you the part #
Mike
|
Posted By: p/allen
Date Posted: July-21-2007 at 7:25pm
http://www.depcopump.com/ - depco raw water pumps rebuild
Try this sight . They have almost everything . Or can rebuild to brand new .
-------------
Pat
http://i175.photobucket.com/albums/w146/72ccfan/100_5977-1.jpg - My 72 Skier
Rock River
Dixon,ILL.
|
Posted By: korey
Date Posted: June-09-2008 at 7:25pm
Hello all,
I am working on putting a neglected '70 barracuda back on the water, and need to rebuild the water pump as well.
I contacted Depco based off of the link above and struck gold! Not only did Jim know exactly what he was talking about, they had all of the parts in stock!
To help anyone who might search for this in the future, here is my parts list and pricing from Depco:
Impeller 1210-0001 $16.09
gasket 8614-0000 $8.22
wear plate 8493-0000 $9.70
mechanical seal 96080-0080 $27.81
bearing seal 93000-0090 $6.78
bearing 92600-0070 $32.03
Total $100.63
Or the link to their page in the catalogue for the Jabso 11850-0801. http://www.depcopump.com/catalog109/138.pdf - Link
My pump is a 11850-80. I'm thinking that the only difference between the two is that the new (-0801) is set up for mounting and belt tensioning off of the end cover, whereas the pump on my HM 302 mounts using the screws for the end cover. What I am getting at that I suspect that they interchangeable (using your old end plate), but at $400 versus $100+ my cheap labor to rebuild, I'll go that route!
Cheers!
-------------
Korey Morris
1970 CC Barracuda Project
1993 Sport Nautique
|
|