Stearing Wheel
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=7690
Printed Date: January-18-2025 at 4:04am
Topic: Stearing Wheel
Posted By: Charlie
Subject: Stearing Wheel
Date Posted: July-26-2007 at 10:00am
Guys I did a search but came up blank even though I thought I read about it before.
I have to adjust the stearing wheel since it's way off. So just to make sure I got this right undo the wheel have someone keep the rudder straight and replace the wheel to where it's supposed to be, right?
Thanks,
Charlie
-------------
87 Ski Nautique 2001
East Herkimer, NY
Piseco, NY
|
Replies:
Posted By: 8122pbrainard
Date Posted: July-26-2007 at 10:39am
Charlie, I think this is the thread you were looking for. Look towards the end for Tim's(TRbenj) instructions.
Edit: Let me try the link again! David, Thanks for telling me there was something wrong with it!
http://www.correctcraftfan.com/forum/forum_posts.asp?TID=7562&PN=1 - Adjusting helm
It works this time!!
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: David F
Date Posted: July-26-2007 at 12:54pm
Charlie:
Doing a search with the correct spellign "steering" might help.
I could not get the above link to work, so here is an abbreviated process I use.
1. First ensure that the wheel is centered in its operational range. I.e. same number of turns to lock in both directions from center.
2. Loosen clamp block on torque tube.
3. Position rudder to straight ahead position (do not let steering wheel move).
4. Tighten clamp block on torque tube.
5. Test drive and repeat 2-4 until you got it right.
-------------
|
Posted By: Charlie
Date Posted: July-28-2007 at 9:42am
Will give it a try Dave.
Thanks for the info.
Charlie
-------------
87 Ski Nautique 2001
East Herkimer, NY
Piseco, NY
|
|