Print Page | Close Window

1976 Dash Wiring for Ignition switch

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=9161
Printed Date: November-16-2024 at 1:24pm


Topic: 1976 Dash Wiring for Ignition switch
Posted By: pmccook1
Subject: 1976 Dash Wiring for Ignition switch
Date Posted: December-09-2007 at 12:45am
Can somebody give me a quick answer.

I was replacing the ignition switch on a 1976 ski nautique.

While taking the old switch out, I knocked the wire off that goes to the BAT pole,     I was trying to do one wire at a time , I got the Sol and the IGN poles wired.
But I pulled the Bat wire lose before I could see what it was connected to up in the dash.   I thought there would be a connecter sitting there visible and it would be obvious But I can't see what it was connected to.   
Where does it go ?   

Thanks in advance.
Phillip


-------------
pmccook1

Current boat:1993 Ski Nautique " Purple "
Have owned : 76' ski nautique, 93' Sport Nautique, 83 Stars and stripes, 47' Chris Craft Continental



Replies:
Posted By: 8122pbrainard
Date Posted: December-09-2007 at 11:02am
Phil, If you still have the amp meter, the Bat term on the switch goes to it. (the load side) If the boat has been converted to a volt meter then take a close look at the wiring diagram as there are a couple ways of doing it.



-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: pmccook1
Date Posted: December-09-2007 at 11:31am
Thank you very much Brainard,

Phillip

-------------
pmccook1

Current boat:1993 Ski Nautique " Purple "
Have owned : 76' ski nautique, 93' Sport Nautique, 83 Stars and stripes, 47' Chris Craft Continental



Print Page | Close Window