Flex Hose
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=929
Printed Date: January-15-2025 at 2:36pm
Topic: Flex Hose
Posted By: Jim_In_Houston
Subject: Flex Hose
Date Posted: October-18-2004 at 6:04pm
|
I need two flexible hoses for the intake water for my 1968 Ford Interceptor engine: (1) 1-1/4" x 23" and (1) 1-1/4" by 17". Does anyone know of a source? (I tried finding a replacement j-hose also but I think I can forget that - it is 1-1/4" on the long side and about 2-1/8" on the short side (of the J)?
|
Replies:
Posted By: Rick
Date Posted: October-20-2004 at 4:10am
Jim I took the old hose off of my 318 down to Napa and we mixed and matched hoses until we had matches. One we had to use 2 hoses and a brass splice but it worked great
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=250&yrstart=1996&yrend=2000%20" rel="nofollow - 2000 Ski
|
Posted By: tstafford
Date Posted: October-20-2004 at 12:05pm
Jim,
I put all new hoses on my 68 Interceptor. I took the hoses to the auto parts store and matched them up. I used a brass reducer as well. I have a picture of the hoses in the diaries section.
-------------
Trevor 1968 Mustang
|
Posted By: Jim_In_Houston
Date Posted: October-20-2004 at 1:28pm
|