318 question start up
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=931
Printed Date: December-03-2024 at 2:53pm
Topic: 318 question start up
Posted By: vande_v
Subject: 318 question start up
Date Posted: October-19-2004 at 12:49pm
|
Hey all, I am going to start up my 318 engine on a boat i just got. It hasent been started in over a year. Before that it was running fine. Is there anyting i should do besides check oil, plugs etc...before i try to turn over? I will be doing on its trailer with a flushmaster kit and super renforced water hose.
Any advice will be well taken. Thanks all...Chris  ------------- Mac daddy... |
Replies:
Posted By: IrishFooter
Date Posted: October-19-2004 at 6:12pm
|
Make certain the carb is free of obstructions. We recently pulled the old snowplow truck out to give it a once over and found a nice bees nest as well as a mouse nest in the aircleaner. So if there exists any holes in the spark arrester you might have a similar problem. Also make certain the fuel is drained if you are uncertain of the length of time down or if stabilizer was not added. ------------- 1979 Ski Nautique |