PCM 351 Parts Scotland!
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=9668
Printed Date: November-19-2024 at 8:38pm
Topic: PCM 351 Parts Scotland!
Posted By: GarethC
Subject: PCM 351 Parts Scotland!
Date Posted: February-18-2008 at 9:19pm
Hey Guys
Looking for the following parts, shipped to scotland...I guess the only seriously priced bit is the exhaust manifold itself, any advice on the riser bolts appreciated.
email from marina:
Please find below the list of parts needed to rebuild the engine:
1 x Carburettor Repair Kit - http://www.skidim.com/prodinfo.asp?number=RN0120-1
1 x Exhuast Manifold - http://www.skidim.com/prodinfo.asp?number=R028001
8 x Manifold Bolts - http://www.skidim.com/prodinfo.asp?number=RS3945
1 x Exhaust Manifold Gasket - http://www.skidim.com/prodinfo.asp?number=RM0007
1 x Exhaust Riser Gasket - http://www.skidim.com/prodinfo.asp?number=RM0002
We would also need 4 bolts for the riser which I could not see on the website. We may be able to source these locally, however I would suggest that you pose the question on the forum. These may be available seperately, although with the number of items you are ordering, they may be able to advise a suitable service kit instead.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=2197
|
Replies:
Posted By: boat dr
Date Posted: February-18-2008 at 9:32pm
Why are you only buying one manifold?
I have a set of take offs in perfect condition that will go for less than you will pay retail.They are a complete set complete with risers & bolts.
Shoot me an address and will get a shipping cost.I have an account with Fed Ex.
-------------
boat dr
/diaries/details.asp?ID=4631 - 1949 Dart
/diaries/details.asp?ID=1533 - 1964 American Skier
|
Posted By: GarethC
Date Posted: February-19-2008 at 11:07am
Hi boat dr
As far as I know the marina had to drill through the bolts on the manifold as they had become corroded, in attempts to replace a leaky gasket. While doing this they cracked the manifold itself.
Sorry for my lack of terminology (I am just going on what the marina are saying), but is your set all that I would need, so only needing the carb rebuild kit from skidim ?
Cheers
Gareth
address would be:
Caledonian Marine Ltd, Rhu Marina, Pier Road, Rhu, Helensburgh, Scotland G84 8LH
|
Posted By: dans
Date Posted: February-24-2008 at 3:21am
PMC original manifolds for $159 each. I also got the gasket kit for both sides & all the bolts for the manifolds & risers for $50.00 http://www.marineexhaustmanifolds.com/pcm.cfm - http://www.marineexhaustmanifolds.com/pcm.cfm They sell skidim parts so they are cheaper. They have water pumps cheap also ,not sure about the carb stuff. I had my order in 4 days, great people.The kit is not on the web , but call & ask about it.It's the same kit Skidim has for double the price.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1404&sort=&pagenum=1&yrstart=1981&yrend=198582 - 82 2001
|
|