Circuit Breakers
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=9766
Printed Date: November-15-2024 at 11:46pm
Topic: Circuit Breakers
Posted By: Blazer
Subject: Circuit Breakers
Date Posted: March-03-2008 at 9:00pm
I own a 1989 Ski Nautique 2001. I need to replace some/all of the circuit breakers in the dash.
I can't seem to find them locally. Any sources for the E-T-A 2-5700-IG1-P10-DD-2.5 or acceptable subsitutes will be appreciated.
I have only pulled one from the dash. Does anyone know off hand if they are all 2.5 amp?
|
Replies:
Posted By: TRBenj
Date Posted: March-03-2008 at 9:13pm
http://shopwhitelake.com/dashelectrical.html - White Lake sells the breakers. They dont all have the same current rating- they range from 2.5 to 20A.
-------------
|
Posted By: Blazer
Date Posted: March-04-2008 at 12:13pm
|
Thanks for the lead. I will pull the remainder from the dash this week and order accordingly.
|
Posted By: Bremsen
Date Posted: March-04-2008 at 1:09pm
ouch, WL is a little pricey on those. Skidim also sells them.
http://www.skidim.com/products.asp?dept=1039
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=923&sort=&pagenum=3&yrstart=1986&yrend=1990 - Our 88 SN2001
|
Posted By: azeus17
Date Posted: March-04-2008 at 1:58pm
I bought from Skidim last year. They are very helpful and can tell you what amp rating each of them should be.
-------------
Boats:
Current: 02 SANTE
Sold: 89 Sport Nautique
|
Posted By: Blazer
Date Posted: March-06-2008 at 4:37pm
Thanks. I plan to pull the remaining breakers this weekend. I need to re-work some of the wiring while I am under the dash.
I appreciate the leads.
|
Posted By: Blazer
Date Posted: March-16-2008 at 1:14pm
I ended up buying the breakers from Skidim. The order arrived within a couple of days. I installed them yesterday and all is working well again.
I went ahead and replaced all of the female connectors while I was in the dash. SOme of them were corroded to the point they broke off when I pulled the dash plate.
I will have to re-install them in the new dash plate when I order it, but we are functional once again. Thanks to all for the info.
ONe question about the red indicator lights. When I get ready to install the new dash plate. DO they just puch out? Does the black ring on the outside come off?
I didn't spend much time looking at them, but wondered how they come out.
|
Posted By: Bremsen
Date Posted: March-16-2008 at 11:41pm
Blazer, we couldn't figure out the little red lights either. Ended up clipping each one off and adding terminals to re-install.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=923&sort=&pagenum=3&yrstart=1986&yrend=1990 - Our 88 SN2001
|
|