Print Page | Close Window

1968 Wiring Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=9980 Printed Date: November-15-2024 at 11:36pm Topic: 1968 Wiring Posted By: dag5303 Subject: 1968 Wiring Date Posted: March-29-2008 at 9:30pm What is the small silver 2 terminal box on the back of the tach? It is not wired to the tach appears to just be mounted to one of the tach studs. The original fuel gauge and oil pressure gauge hot wire comes through this box. The temp gauge which is newer replacement does not. I am putting in all new gauges and don't know if I can eliminate this part. No part# or mfg name. Replies: Posted By: 8122pbrainard Date Posted: March-29-2008 at 9:35pm David, Ohm meter it and see if there is resistance between the two terminals. I would have to say that it is a resistor for the old original gauges. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete <

Print Page | Close Window