need help..installation of a skylon pole |
Post Reply |
Author | |
Guests
Guest |
Post Options
Thanks(0)
Posted: December-15-2005 at 6:13pm |
can someone PLEASE help!...i just recently purchased a skylon extension. bought it off e bay, and have no idea how this connect to boat..close up pics would be great.. really confused on how this connects to front of boat..thanks
|
|
bkhallpass
Grand Poobah Joined: March-29-2005 Location: United States Status: Offline Points: 4723 |
Post Options
Thanks(0)
|
There should be a heavy nylong ring with the kit. Slide it through the bow eye so that you have a loop in each hand, and the strap is double wide through the bow eye (not the lifting ring, the bow eye which you hook to the trailer). Now both ends that you have in your hand attach to the cable which runs from the pole. There is probably a caribiner to hook the strap into.
Go to the following post where chavonbravo has posted a pic of his setup. You should get the idea: http://correctcraftfan.com/forum/forum_posts.asp?TID=2744&PN=2&TPN=1 BKH |
|
Livin' the Dream
|
|
882001
Senior Member Joined: October-21-2003 Location: United States Status: Offline Points: 332 |
Post Options
Thanks(0)
|
<img src="http://www.correctcraftfan.com/diaries/images/163/DSC00046.JPG">
|
|
kemah texas
1988 skinautique "2001" |
|
882001
Senior Member Joined: October-21-2003 Location: United States Status: Offline Points: 332 |
Post Options
Thanks(0)
|
|
|
kemah texas
1988 skinautique "2001" |
|
The Dude
Platinum Member Joined: October-19-2004 Location: Houston Status: Offline Points: 1334 |
Post Options
Thanks(0)
|
Hey 88,
Where do you put in most of the time? I'm in Friendswood. Where's your trailer from? |
|
Mullet Free since 93
95 Sport |
|
882001
Senior Member Joined: October-21-2003 Location: United States Status: Offline Points: 332 |
Post Options
Thanks(0)
|
havent had the boat out since rita evac.
we put in at walter hall mostly. that sport is sweet. almost bought a 98 air last year, but didnt wanna go from no payment to having a payment. but should of, it was an awsome deal, but my boat is fine just a little small.havent had the boat out since rita evac. |
|
kemah texas
1988 skinautique "2001" |
|
Guests
Guest |
Post Options
Thanks(0)
|
thanks guys...now that i have played around with it, its pretty simple..
|
|
882001
Senior Member Joined: October-21-2003 Location: United States Status: Offline Points: 332 |
Post Options
Thanks(0)
|
i hook mine to the lifting ring. about 50% will tell you its a bad idea. but havent heard of any ill effects, the boat is built like a tank. and mine has not had any problems at all
|
|
kemah texas
1988 skinautique "2001" |
|
Dank
Senior Member Joined: April-05-2005 Location: Austin, TX Status: Offline Points: 296 |
Post Options
Thanks(0)
|
I hook mine to the lifting ring as well.
|
|
"I don't know what the world may need, but a V8 engine's a good start for me"
|
|
Rick
Senior Member Joined: March-03-2004 Location: United States Status: Offline Points: 338 |
Post Options
Thanks(0)
|
Ryan before you put it over your pylon make sure you have the right mesh sleeve. It is either white or yellow depending on the pylon I beleive all CC use the white Let me know if you need some I may have some left.
|
|
chavonbravo
Newbie Joined: November-01-2005 Status: Offline Points: 35 |
Post Options
Thanks(0)
|
I got mines off ebay, and they only had the red mesh...boy was that hard to get on. had to kinda hammer the pylon down. Also, my top portion swivels a bit while underway. Wouldn't really be noticeable except that with a wakeboard rack, you can tell when the wakeboards are like 45 degrees off to the side. :)
|
|
Guests
Guest |
Post Options
Thanks(0)
|
rick i actually do not have that mesh, i didnt know you had to have it...makes sense i put the bottom portion on and it was very sloppy..if you have some i cloud send you some cash..or even where could i purchase the mesh if you can't come up with any..thanks again guys for the advice.
|
|
87martinique
Newbie Joined: September-01-2005 Location: United States Status: Offline Points: 16 |
Post Options
Thanks(0)
|
I just got a Joystick pylon and need to find the insert. Rick do you know if the yellow insert is thinner then the white insert. There was a white insert on my pylon when i bought the boat but it is too tight for the pylon to slip over.
|
|
05 210
Platinum Member Joined: February-17-2006 Location: Southern Maine Status: Offline Points: 1481 |
Post Options
Thanks(0)
|
The yellow insert is smaller and the only one that would work on my 98 air tique.The red & white ones were too big.That mesh is the same stuff they use to protect machined metal parts.If you know someone who is a machinist or sells machining equip.,they can get you a roll for next to nothing.I also used my lifting ring,but if it's not adjusted properly(i.e.the turnbuckle under the bow)the ring can move around when pole is loaded and you'll damage the gelcoat.hope this helps.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |