Bow Seating Backrest Removal - 2003 SAN

I've checked that area pretty well I thought. I did read that there was some stud / nut fasteners around the cup holder area.

for the life of me I can't find them.

Back to the shed.!

Ok so I had another quick look last night, but it was too dark to really get into it.

Seems that there is 2 more screws on the port side that are behind the factory amp mounting board. I can't see any way to get to these.? Any ideas.?

Also seems that there is another (3rd) screw on the starbord (driver) side. I haven't been able to find / get to this screw yet do to all the wires / ducts, and the factory subwoofer.

Dave,
SAN = Super Air Nautique.

I can, but I'm not sure exacty what you'll want / need to see.?

Hey guys,
I'm trying to remove the backrest for the bow seating in the SAN for cleaning and speaker replacement.

I did some research over on PN on the process before attempting removal last night. I will post there also, but thought someone here may know.

I have removed 2 x screws on the port side, another 2 x screws in front of the driver, and 1 double nut arrangement at the front. I have felt around as much as I can reach behind the cup holders but there are no fixings here (except for the grab rail).

I understand that you have to lift it at the cabin end to pop it out of the locating clips.? I lifted it as much as I dared last night but it wouldn't budge.?

I don't think I missed any screws, but I will double check - it's pretty busy with wires, ducts, and the subwoofer behind the drivers kick pannel.

Thoughts.?