fuel gauge |
Post Reply |
Author | |
Burtman
Newbie Joined: February-16-2009 Location: United States Status: Offline Points: 39 |
Post Options
Thanks(0)
Posted: June-13-2011 at 1:43pm |
yes it was nice to not have to open the wallet
|
|
Burtman
"I'll help where I can but don't make your problems my problems" |
|
Bri892001
Grand Poobah Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
Post Options
Thanks(0)
|
Gotta love the simple and free fixes
|
|
Burtman
Newbie Joined: February-16-2009 Location: United States Status: Offline Points: 39 |
Post Options
Thanks(0)
|
I took the back seat and rear panel out and noticed that one wire at the unit itself was broken off at the conection point. Cut about 4" off of the wire and reattached. Works great.
Thanks everyone. |
|
Burtman
"I'll help where I can but don't make your problems my problems" |
|
gun-driver
Grand Poobah Joined: July-18-2008 Location: Pittsburgh, Pa Status: Offline Points: 4127 |
Post Options
Thanks(0)
|
Gary,
I got it from a ATV/snowmobile shop in my area. They usually have some lying around. You can also check Lowes hardware drawers in the area of the furniture fastners they carry corks. |
|
Gary S
Grand Poobah Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
Post Options
Thanks(0)
|
[QUOTE=gun-driver] Replaced the cork with a new foam float and wallah worked like a champ.QUOTE]
I think I have the same problem Paul.Where did you get a float? |
|
Burtman
Newbie Joined: February-16-2009 Location: United States Status: Offline Points: 39 |
Post Options
Thanks(0)
|
No ski course on my lake Kirk. I'm in southwest lower Michigan. Where are you located at?
Also, thanks for all of the usefull info. I will be working on this tomorrow morning to see what i can come up with. I will deffinetly check the cork before dropping the loot on an entire new unit. |
|
Burtman
"I'll help where I can but don't make your problems my problems" |
|
gun-driver
Grand Poobah Joined: July-18-2008 Location: Pittsburgh, Pa Status: Offline Points: 4127 |
Post Options
Thanks(0)
|
Do exactly what Pete said in the other thread. But also check the condition of the cork float.
I had the same problem with my "85. After doing all the tests Pete said it tested fine including the ohm test. Put it all back together still didn't work It ended up that the cork had built up a bunch of varnish and was gas soaked and would not float correctly. Replaced the cork with a new foam float and wallah worked like a champ. Still have the $50.00 sending unit sitting in the garage that I bought to replace it with. Moral of this story, don't rush out to buy replacement parts till you know you'll need them!!! |
|
Bri892001
Grand Poobah Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
Post Options
Thanks(0)
|
Cool Pete. That's what I was looking for
|
|
8122pbrainard
Grand Poobah Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
|
Fuel tank sending unit The search feature is fantastic but using the correct key word can be the problem at times!
|
|
dochockey
Gold Member Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
Post Options
Thanks(0)
|
Do you have a ski course where your at?
Kirk |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
Burtman
Newbie Joined: February-16-2009 Location: United States Status: Offline Points: 39 |
Post Options
Thanks(0)
|
Thanks Bri
I will try cleaning all of the conection points this weekend and post any results. |
|
Burtman
"I'll help where I can but don't make your problems my problems" |
|
Bri892001
Grand Poobah Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
Post Options
Thanks(0)
|
There are ways to test to see which side had failed. This just came up. I did a quick search and couldn't find the other thread. I'll look later and see what I can come up with.
Something about grounding he sender wire and if the gauge moves, then it's the sender. Not totally sure though. Worth trying to clean up the sender wire connection as well. |
|
Burtman
Newbie Joined: February-16-2009 Location: United States Status: Offline Points: 39 |
Post Options
Thanks(0)
|
86 ski that the fuel gauge will only show empty.
What is the best route to take to get fixed beside just keeping the tank full? New sending unit? |
|
Burtman
"I'll help where I can but don't make your problems my problems" |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |