96 ski Nautique starting issue |
Post Reply ![]() |
Author | |
Bri892001 ![]() Grand Poobah ![]() ![]() Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
![]() ![]() ![]() ![]() ![]() Posted: August-26-2015 at 11:44pm |
It's likely the problem, but he hasn't for sure proved it until he checks that positive power is making it past the Neutral Safety Switch and to the S terminal on the Solenoid. Actually, this image is a perfect explanation of the stock PCM configuration. The solenoid is shaped different but exact same idea: ![]() |
|
![]() |
|
s_kelley2000 ![]() Senior Member ![]() Joined: December-03-2012 Location: Boylston, MA Status: Offline Points: 141 |
![]() ![]() ![]() ![]() ![]() |
If he jumps the solenoid and it cranks hasn't he already proved that it is the problem?
|
|
![]() |
|
8122pbrainard ![]() Grand Poobah ![]() ![]() Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
![]() ![]() ![]() ![]() ![]() |
I Try not to just throw parts at a problem before testing. I'd sure recommend getting the VOM out first. Is the coil on the starter relay (solenoid) getting power? Is the coil on the relay open? Does the relay have a good ground? Are it's contacts good showing close to zero Ohms? |
|
![]() |
|
BobWall ![]() Newbie ![]() Joined: August-23-2015 Location: RI Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
Yes we are jumping the posts on the solenoid. Thanks for the feedback!
|
|
![]() |
|
s_kelley2000 ![]() Senior Member ![]() Joined: December-03-2012 Location: Boylston, MA Status: Offline Points: 141 |
![]() ![]() ![]() ![]() ![]() |
It sounds like your starting solenoid is going out. I assume you are jumping the posts on the solenoid to get it to crank? Or are you jumpering a wire from the battery directly to the starter? Either way I think the solenoid is your problem. Easy 5 minute swap on a Python and I imagine the Fords are similar.
solenoid |
|
![]() |
|
BobWall ![]() Newbie ![]() Joined: August-23-2015 Location: RI Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
On the starter
|
|
![]() |
|
Bri892001 ![]() Grand Poobah ![]() ![]() Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
![]() ![]() ![]() ![]() ![]() |
Jump which wires?
|
|
![]() |
|
gun-driver ![]() Grand Poobah ![]() Joined: July-18-2008 Location: Pittsburgh, Pa Status: Offline Points: 4128 |
![]() ![]() ![]() ![]() ![]() |
I'd say start here, lots of good info on the GT-40
http://www.correctcraftfan.com/forum/forum_posts.asp?TID=25584&title=poor-mans-gt40-diagnosis |
|
![]() |
|
BobWall ![]() Newbie ![]() Joined: August-23-2015 Location: RI Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
I just bought a SN. It does not always crank but sometime just clicks. It you jump the wires with the key turned it cranks. Already replaced ignition switch unit. Ideas?
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |