1984 Ski Natique Wheel Bearing

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   OldSchool nailed it.  Your axle most likely has a #84 spindle.  You can do a search for "number 84 spindle" and get plenty of options.  In my area, many of the local auto parts stores carry these bearings, races and seals.  My personal preference is Made in the USA stuff.  I've had some bad experiences with some cheap Asian bearings.

JQ

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Jonny Quest Members Profile Send Private Message Find Members Posts Add to Buddy List Grand Poobah Joined: August-20-2013 Location: Utah--via Texas Status: Offline Points: 2976	Post Options Post Reply Quote Jonny Quest Report Post Thanks(0) Quote Reply Topic: 1984 Ski Natique Wheel Bearing Posted: June-13-2016 at 12:20am
	OldSchool nailed it. Your axle most likely has a #84 spindle. You can do a search for "number 84 spindle" and get plenty of options. In my area, many of the local auto parts stores carry these bearings, races and seals. My personal preference is Made in the USA stuff. I've had some bad experiences with some cheap Asian bearings. JQ
	Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum

OldSchoolBlue84 Members Profile Send Private Message Find Members Posts Add to Buddy List Gold Member Joined: December-02-2012 Location: Valparaiso, IN Status: Offline Points: 814	Post Options Post Reply Quote OldSchoolBlue84 Report Post Thanks(0) Quote Reply Posted: June-13-2016 at 12:05am
	Assuming it's an original trailer, below is what I used. Good luck 1984 Correct Craft Trailer #3 Trailer (single axle) Tires: 205/75D/14 - 5 Bolt (F78-14 or G78-14) Trailer Tongue: 3500 Gross Weight Spindle = #84 (1-3/8" inner, 1-1/16" outer) Inner Bearing = L68149 Inner Race = L44610 Inner Seal = 10-19 Outer Bearing = L44649
	Kostas 1984 Ski Nautique 2001

Jonny Quest Members Profile Send Private Message Find Members Posts Add to Buddy List Grand Poobah Joined: August-20-2013 Location: Utah--via Texas Status: Offline Points: 2976	Post Options Post Reply Quote Jonny Quest Report Post Thanks(0) Quote Reply Posted: June-12-2016 at 8:42pm
	You will need to measure the axle spindles to be sure. Get a good micrometer or caliper. The diagram will show you the measurements to take. With those measurements, you can order the proper bearings, races and seals. Image from etrailer.com JQ
	Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum

Jabel1986 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: June-12-2016 Location: California Status: Offline Points: 2	Post Options Post Reply Quote Jabel1986 Report Post Thanks(0) Quote Reply Posted: June-12-2016 at 8:12pm
	I am new to the boating forum, I have a 1984 Ski Natique and today the wheel bearing burnt out and the grease fitting is gone. It looks like the wheel needs to replaced. I left the boat at a tire shop and was wondering if anyone knows the parts I will have to buy and where to buy them? I was also wondering if there is a different modern arrangement to instal instead of grease added seals? I was also wondering if anyone knows how to get a schematic of the 1984 correct craft trailer. Everything is original! The hub looks def cracked. The grease housing is gone. Any help will be greatly appreciated.

1984 Ski Natique Wheel Bearing

About CCF

Donate

Partners

Contact