Boats For Sale:
Bilge Pump wiring |
Post Reply 
|
| Author | |
TRBenj 
Grand Poobah 
Joined: June-29-2005 Location: NWCT Status: Offline Points: 21198 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Bilge Pump wiringPosted: June-24-2020 at 1:58pm |
|
You’re going to need to remove the dash panel. A multimeter will serve you better than a test light.
|
|
 |
|
|
illiniball2000
Senior Member 
Joined: June-27-2014 Location: Elgin,IL Status: Offline Points: 386 |
Post Options
Thanks(0)
Quote Reply
Posted: June-24-2020 at 1:22pm |
|
So I used a test light on the wires from the pump with Pump Auto/Pump Manual on and off. Never got power to one of the wires which I assume is going to the Pump Manual switch.
So Does that dash slide up after taking the four screws out for access? If the breaker is bad are they available for purchase? |
|
|
Beer is my friend
87 Dominique Had 67 Starflite |
|
|
|
|
TRBenj
Grand Poobah
Joined: June-29-2005 Location: NWCT Status: Offline Points: 21198 |
Post Options
Thanks(0)
Quote Reply
Posted: June-24-2020 at 9:15am |
|
The “switches” are breakers, there are no fuses.
Are you testing voltage at the output of the breaker or relying on the lights to determine on/off? Sounds like the manual breaker is suspect but you’ll need to start measuring. |
|
|
|
|
8122pbrainard
Grand Poobah
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
Quote Reply
Posted: June-24-2020 at 8:16am |
|
Brian,
Does the pump run when it's switched to ether auto or manual? Have you checked to see if the pump is clogged with debris? Yes, the black will be ground but take a look at the other wire colors again. Both would be the same color but, one would have a "tracer" color on it typically white. Yes, there should be a fuse in there someplace. |
|
|
|
|
illiniball2000
Senior Member
Joined: June-27-2014 Location: Elgin,IL Status: Offline Points: 386 |
Post Options
Thanks(0)
Quote Reply
Posted: June-24-2020 at 12:21am |
|
87 Dominique
Bilge Pump Auto switch light comes on above. Bilge pump Manual switch no light above Three wires off pump. One gets power with thenPump auto switch on. Other wire of same color gets no power with either switch on. Assume black is ground. Should there be a fuse somewhere no this setup? Next step t I troubleshoot? Thanks, Brian |
|
|
Beer is my friend
87 Dominique Had 67 Starflite |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options