Boats For Sale:
Mustang teak edition |
Post Reply 
|
Page <123> |
| Author | |
jonas 
Groupie 
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: September-09-2010 at 7:42pm |
|
Tanks for the comment Pete
I'v been waiting to hear from you... I have a few things to add... The stringers are glassed over I forgot to take pic's of all of the glas process. They have 4 layers in the front and 3 in the back (from the engine and back). The pic's i have off the glassed in stringers are taken half way done. My main stringers are made 34 mm. taller than original to make the storage room in front of engine bigger. this gives some extra strengt to make up for some the strengt lost in ply. They are also 3 mm wider. All of this said i know that i probaly don't have the same strengt as the many other rebuilds here. The vents in the doghouse are for ventilating the engine i dont have tubes running under the floor. 
The gray area in the foto is for storage and the black tube it for wire. |
|
 |
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: September-09-2010 at 8:14pm |
|
Waterdog
It is a threaded rod wiht a T at the end set in epoxy in the stringer. The mounts are held by nuts. all stainless steel. |
|
|
|
|
8122pbrainard
Grand Poobah 
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
Quote Reply
Posted: September-09-2010 at 8:17pm |
|
Jonas,
Got it now and yes, you're better off than I originally thought. I'm glad to hear that the ply was glassed. What did you use for foam? Is it out of a aerosol can? |
|
|
|
|
Waterdog
Grand Poobah
Joined: April-27-2006 Location: United States Status: Offline Points: 2020 |
Post Options
Thanks(0)
Quote Reply
Posted: September-09-2010 at 8:26pm |
 Aqua-Art Your a true craftsman.
|
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: September-10-2010 at 7:46pm |
|
The foam is out of cans... i do a lot af construction so I get them very cheap....
|
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: January-20-2011 at 5:36pm |
|
So it's a new year and i'm starting on some of the projects on the boat...
I have a list of: 1 new dashboard 2 make a plate to cover the gas tank 3 install led light's under the swimplatform and under the sides on the inside of the boat. 4 put on a tower... I hope to get some of this done before the season start. I startet on the dash install this week...
I made the new dash out of teak last week so now it's down to getting it to fit. 
Test fitting 
Startet on casting the rise to make space for the gauges... 
|
|
|
|
|
connorssons
Platinum Member 
Joined: January-17-2009 Location: Michigan Status: Offline Points: 1414 |
Post Options
Thanks(0)
Quote Reply
Posted: January-20-2011 at 11:57pm |
|
Are you going to cut out dash where wood dont cover?
|
|
|
|
|
Donald80SN
Grand Poobah
Joined: January-12-2009 Location: Denver, NC Status: Offline Points: 3896 |
Post Options
Thanks(0)
Quote Reply
Posted: January-21-2011 at 12:00am |
|
I see the case of coke, but you are suppose to use a case of beer as dead weight. Please reconsider the tower idea. I love the floor in your boat.
Donald
|
|
|
|
|
Ranger
Senior Member 
Joined: August-23-2010 Location: San Diego Status: Offline Points: 151 |
Post Options
Thanks(0)
Quote Reply
Posted: January-21-2011 at 12:39am |
|
Very Impressive Work.
Thanks for posting! Jeff |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: January-27-2011 at 6:12pm |
|
Made some progress today.
I startet out with 7 layers of glass and then bondo for the rest of the shape. The bondo is not the regular it's made to bond to fiberglass and have fibers in it. first layer 
I put the dash in to make the curves fit 
second layer 
Donald: I'm not sure what to do with the tower yet. I like the idea of having the space for speakers, lights, wakeboard's and having a good place to mount the rope. but I also like the clean look of not having the tower... And my beer is not a good deadwight because it's not in the case long anough 
|
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: February-11-2011 at 5:42pm |
|
more pics...
|
|
|
|
|
ky82sn
Senior Member
Joined: December-05-2010 Location: Finchville,KY Status: Offline Points: 201 |
Post Options
Thanks(0)
Quote Reply
Posted: February-11-2011 at 6:41pm |
|
what an awesome job on the woodwork. Do you remember the name brand of the canned foam u used between stringers?
|
|
|
1982 ski nautique
1966 Al Tyll Skier |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: February-11-2011 at 7:16pm |
|
The foam is from www.sika.com it's sikaboom-g
|
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: March-26-2011 at 6:45am |
|
some pic's
I will be working on it all weekend so I hope to see some progress....
|
|
|
|
|
Swatkinz
Platinum Member
Joined: December-03-2003 Location: Lexington, SC Status: Offline Points: 1307 |
Post Options
Thanks(0)
Quote Reply
Posted: March-26-2011 at 10:07am |
|
great skills
|
|
|
Steve
2011 Sport/Air 200 Excalibur 343 2017 Boatmate Tandem Axle Trailer Former CC owner (77, 80, 95, 88, all SNs) Former Malibu owner (07, 09) |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: March-27-2011 at 4:24pm |
|
Tanks Steve
Here are the progresss for the weekend 
I also did a lot of the wires.... |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: March-27-2011 at 4:39pm |
|
|
|
|
|
critter
Platinum Member
Joined: January-11-2008 Location: New Hill, NC Status: Offline Points: 1227 |
Post Options
Thanks(0)
Quote Reply
Posted: March-27-2011 at 5:56pm |
|
Wow !!! That looks nice...
|
|
|
1980 Ski Nautique
1966 Barracuda |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: May-12-2011 at 5:07pm |
|
So I am getting closer to ready for the water...
Got the trailer paintet and assembled, just need to find some alloy's for it. 
put on some custom vinyl 
I also replaced the shaft paking with a oj dripless and repaked the rudder. Did a full service on motor while it was out and replaced the rwp. alignment done after the video from here piece of cake...
|
|
|
|
|
Keeganino
Grand Poobah
Joined: October-27-2009 Location: North Carolina Status: Offline Points: 2063 |
Post Options
Thanks(0)
Quote Reply
Posted: May-12-2011 at 5:12pm |
|
I love the script on the transom and the pony graphic on the side. Truly a custom job.
|
|
|
"working on these old boats may not be cost effective but as it shows its what it brings into your life that matters" -Roger
1973 Skier |
|
|
|
|
kapla
Grand Poobah
Joined: March-27-2008 Location: BA, Argentina Status: Offline Points: 6148 |
Post Options
Thanks(0)
Quote Reply
Posted: May-12-2011 at 7:21pm |
nice job sir!!! 
|
|
|
<a href="">1992 ski nautique
|
|
|
|
|
Bri892001
Grand Poobah
Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
Post Options
Thanks(0)
Quote Reply
Posted: May-12-2011 at 7:37pm |
|
Wow!! is all I can say
|
|
|
|
|
uk1979
Platinum Member
Joined: June-13-2007 Location: United Kingdom Status: Offline Points: 1423 |
Post Options
Thanks(0)
Quote Reply
Posted: May-13-2011 at 10:31am |
|
Great work there, tell us more about what you have you used?
Roger. |
|
|
Lets have a go
56 Starflite 77 SN 78 SN 80 BFN |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 3:10pm |
|
Well the trailer is an brenderup from 2009.
All the welds are tig and weldet all the way round to prevent rust from the salty waters i go in...
I got it paintet at an local industrial painter we use at work. He did it reel good for little money. I'm on the lookout for an elektric winch for it but I cant seam to find one in all stainles for a reasonable price. I also have to figure out a way to get some 5 bolt mercedes weels on to the 4 bolt hubs so that they match the ones on the car. The vinyl on the boat was designed by my brother cut by a local sign shop and I stuck them on... I made a panel to cover the gas tank area. 
Then some more bling bling...
I got a hold of these led lights so i routet a groove in the side panels and viola! 
Then I installed a sissy handle for the passenger side because i got tired of people falling all over the place when i'm driving
Got the better half involved to she's making some nice leather for the steering wheel.
|
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 3:54pm |
|
Was out on the water yesterday took some more photos and some film to...
It was a great day out but no skiing or boarding because I have no where to pull from! I'll have to get startet on either a tower or a tall pylon with board racks. Jump the gun to get ahead... Mustang |
|
|
|
|
GottaSki
Grand Poobah
Joined: April-21-2005 Location: NE CT Status: Offline Points: 3363 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 4:31pm |
|
<golf clap> well done sir.
Even that dash wire job gave me a chubby. |
|
|
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 5:09pm |
|
Tank you
It's not something that people notice when installed so it's good that some one other than me got some pleasure out of it
I like working with elektrics and it's nice to do it your self so that you now exactly where all the wires go and how it works. |
|
|
|
|
Keeganino
Grand Poobah
Joined: October-27-2009 Location: North Carolina Status: Offline Points: 2063 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 5:15pm |
|
Great pics! I know that thing is a real head turner over there! Beautiful finished product.
|
|
|
"working on these old boats may not be cost effective but as it shows its what it brings into your life that matters" -Roger
1973 Skier |
|
|
|
|
jonas
Groupie
Joined: July-12-2009 Location: Denmark Status: Offline Points: 69 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 6:41pm |
|
Tank's
I do get a lot of compliments and a lot of fists and head shaking from the sailboats... they just don't get the V8 thing
|
|
|
|
|
Randy_in_Ohio
Platinum Member
Joined: September-13-2006 Location: N. Canton, OH. Status: Offline Points: 1891 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2011 at 6:44pm |
|
one of the nicest, classiest, non-correct, Correct Crafts I've seen!
|
|
|
|
|
Post Reply
|
Page <123> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options