Trailer Bearing Sources? |
Post Reply |
Author | ||
davidg
Grand Poobah Joined: January-07-2008 Location: NW Chicagoland Status: Offline Points: 2239 |
Post Options
Thanks(0)
Posted: June-05-2018 at 12:52pm |
|
Where you guys buying your bearings these days? Autozone, Amazon, Ebay?
I am digging into the bearings now, and they look serviceable, but a little pitted. I may just replace them for peace of mind. Does anybody happen to have the bearing #'s for a number 3 DV trailer handy? There are numbers on the current bearings. - The large inner bearing looks to be MGM Radax K25580. - The small outer bearing looks to be UTI K-LM67048. Are there cross references to NTN or Timken bearings? Never heard of these. |
||
MrMcD
Grand Poobah Joined: January-28-2014 Location: Folsom, CA Status: Offline Points: 3749 |
Post Options
Thanks(0)
|
|
When Buying bearings I try to stay with one of the name brands. Timken, SKF, National/BCA., NTN, or Hyatt. These are known to put out Original equipment quality bearings.
Like it or not most are made overseas today but at least these guys provide a bearing you can trust. Some of the stuff imported today has very high tolerances, ( loose bearings ), they are low priced but you get what you pay for. |
||
Gary S
Grand Poobah Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
Post Options
Thanks(0)
|
|
Dave Farm and Fleet had Timken about 2 years ago. Bet they still do.
|
||
Mojo
Grand Poobah Joined: December-06-2006 Location: United States Status: Offline Points: 3106 |
Post Options
Thanks(0)
|
|
Dave,
Go to RA Adams on rte 120 in McHenry. They'll have everything you need. Take off a hub and bring it to them to have it all spec'd. They'll sell all components.. |
||
05' SV211 TE
73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
||
davidg
Grand Poobah Joined: January-07-2008 Location: NW Chicagoland Status: Offline Points: 2239 |
Post Options
Thanks(0)
|
|
Thanks for the responses guys! I am very familiar with F/F, and also Adam's Enterprises. I will see what their prices/availability are.
Anybody ever buy bearings through etrailer? Their prices seem VERY good. Just wondering about quality!? |
||
TRBenj
Grand Poobah Joined: June-29-2005 Location: NWCT Status: Offline Points: 21184 |
Post Options
Thanks(0)
|
|
Have done lots of business with etrailer. They carry all the big brands (dexter, etc).
I have not had issues with the China stamped bearings either. The only set I’ve replaced and inspected still looked great after nearly 10yrs. |
||
davidg
Grand Poobah Joined: January-07-2008 Location: NW Chicagoland Status: Offline Points: 2239 |
Post Options
Thanks(0)
|
|
Thanks Tim! That is good feedback. I just bought the kit from them. With shipping, it was ~$50 for both sets which include bearings, races, seals, and cotter pins.
|
||
OldSchoolBlue84
Gold Member Joined: December-02-2012 Location: Valparaiso, IN Status: Offline Points: 814 |
Post Options
Thanks(0)
|
|
Spindle = #84 (1-3/8" inner, 1-1/16" outer)
Inner Bearing = L68149 Inner Race = L44610 Inner Seal = 10-19 Outer Bearing = L44649 Outer Race = L68111 I just installed, purchased through e-trailer, looks to be good quality. #84 Spindle Bearing Set: https://www.etrailer.com/Trailer-Bearings-Races-Seals-Caps/TruRyde/BK2-100.html |
||
Kostas
1984 Ski Nautique 2001 |
||
Jonny Quest
Grand Poobah Joined: August-20-2013 Location: Utah--via Texas Status: Offline Points: 2974 |
Post Options
Thanks(0)
|
|
+1 for www.etrailer.com
|
||
Current
2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
||
davidg
Grand Poobah Joined: January-07-2008 Location: NW Chicagoland Status: Offline Points: 2239 |
Post Options
Thanks(0)
|
|
I "thought" I had a #3 DV trailer. Maybe it's a # 4, IDK. Anyway, here are the bearings for my trailer.
Kit # BK3-310..... Includes Outer Bearing LM67048 Inner Bearing 25580 Seal GS-2125DL Seal I.D. 2.125" |
||
TRBenj
Grand Poobah Joined: June-29-2005 Location: NWCT Status: Offline Points: 21184 |
Post Options
Thanks(0)
|
|
#4 with 5200lb hardware (6-lug).
The 3dv never came under anything larger than a sw18, and predated the swap to larger running gear (it used 3500lb 5-lug). |
||
tbeard
Senior Member Joined: April-26-2012 Location: Fort Worth TX Status: Offline Points: 379 |
Post Options
Thanks(0)
|
|
Trying to identify the wheel bearings on my 89 Barefoot Nautique single axle trailer. 6 Lug wheels. I think the trailer is a 4DV. Thanks.....Tom
|
||
Thanks.......Tom
|
||
Duane in Indy
Platinum Member Joined: October-26-2015 Location: Indiana Status: Offline Points: 1578 |
Post Options
Thanks(0)
|
|
TRBenj is the trailer guru (boat hull, parts and about anything else CC). Confident he will steer you straight.
|
||
Keep it as original as YOU want it
1978 Mustang (modified) |
||
MrMcD
Grand Poobah Joined: January-28-2014 Location: Folsom, CA Status: Offline Points: 3749 |
Post Options
Thanks(0)
|
|
There is no magic in bearing identification. Take them out and clean them.
The SAE has standard part numbers assigned to the bearing sizes. You will need the number off both the cone and the cup. ( rollers and race ) Take these numbers to any parts store and they can sell you the correct bearing part. The seals are a little harder but if you know the inner bearing race part the seal can be identified from the inner bearing size normally. The outer bearing is the smaller bearing, inner is the larger. Popular bearings have set numbers assigned to them, a Set has both the inner and outer in one box. They are cheaper to buy if you know the set number. The photo is hard to read, sorry but the information shows the Bearing part numbers and the National/BCA Part number or Set number for the bearings. Note: Timken set numbers are almost all the very same but some like the A13 and A17 BCA numbers are not the same in Timken and a lot of boat trailers use the set A13 on the inner bearing. |
||
shouse
Newbie Joined: July-16-2015 Location: Fort Worth TX Status: Offline Points: 35 |
Post Options
Thanks(0)
|
|
Just bought Timken bearings for my Dorsey trailer at Rockauto.
|
||
davidg
Grand Poobah Joined: January-07-2008 Location: NW Chicagoland Status: Offline Points: 2239 |
Post Options
Thanks(1)
|
|
MrMcD.....that is very interesting and good information. I did not know this about bearings. That takes some of the mystery out of them buggers. I walked into Autozone and gave them numbers right from the bearings. They got the small outer bearings figured out pretty easily. For the much larger inner bearings, they had nothing. I went there primarily for grins and giggles just to see what they would say. O'Reilly's actually figured it right out. Just no stock. The local trailer place had them for 2x what etrailers wanted.
Shouse.....How much did you pay for the complete Timken set from Rockauto? Just curious vs. going through etrailer for Chinese bearings. Rock always has pretty good prices. |
||
Gary S
Grand Poobah Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
Post Options
Thanks(0)
|
|
Last box of Timkins I saw a few years ago were made in China. |
||
davidg
Grand Poobah Joined: January-07-2008 Location: NW Chicagoland Status: Offline Points: 2239 |
Post Options
Thanks(0)
|
|
Gary....I did go out to Farm & Fleet as well to see what they had. They had a good assortment of bearings on the shelf there, but, didn't have the ones I needed.
I do like Farm & Fleet. I bought my Valvoline VR1 there this weekend for ~$4.50/qt. Plus, they have a plentiful supply of Fram Filters. |
||
MrMcD
Grand Poobah Joined: January-28-2014 Location: Folsom, CA Status: Offline Points: 3749 |
Post Options
Thanks(0)
|
|
I will try again to attach a picture that can be read for the bearing sizes.
|
||
MrMcD
Grand Poobah Joined: January-28-2014 Location: Folsom, CA Status: Offline Points: 3749 |
Post Options
Thanks(0)
|
|
This listing shows you the BCA National A- Set number and the interchange to the Timken Set number. Most are the same but not all so be careful.
Should help if you need to ID your bearings. Parts Stores can get you the correct numbers if you give them the Set number or you can use the modern update and order them in. NATIONAL Timken Set # BCA # BCA - A1 Timken Set - 1 BCA - A2 Timken Set - 2 BCA - A3 Timken Set - 3 BCA - A4 Timken Set - 4 BCA - A5 Timken Set - 5 BCA - A6 Timken Set - 6 BCA - A7 Timken Set - 7 BCA - A9 Timken Set - 9 BCA - A10 Timken Set - 10 BCA - A12 Timken Set - 12 BCA - A13 Timken Set - 13 BCA - A14 Timken Set - 14 BCA - A15 Timken Set - 8 BCA - A16 Timken Set - 16 BCA - A17 Timken Set - 17 BCA - A18 Timken Set - 11 BCA - A19 Timken Set - 15 BCA - A20 Timken Set - 20 BCA - A21 Timken Set - 21 BCA - A22 Timken Set - 25 BCA - A23 Timken Set - 23 BCA - A24 Timken Set - 27 BCA - A28 Timken Set - 28 BCA - A29 Timken Set - 22 BCA - 517011 Timken Set - 29 BCA - A30 Timken Set - 30 BCA - A30 Timken Set - 32 BCA - A31 Timken Set - 24 BCA - A32 Timken Set - 32 BCA - A33 Timken Set - 33 BCA - A34 Timken Set - 34 BCA - A35 Timken Set - 45 |
||
mark c
Gold Member Joined: May-09-2012 Location: Massachusetts Status: Offline Points: 534 |
Post Options
Thanks(0)
|
|
TrevorB
Newbie Joined: July-01-2016 Location: Wenatchee Wa Status: Offline Points: 14 |
Post Options
Thanks(0)
|
|
I bought Timken set 4 and set 17 from Rock Auto for around $5 a set. All say USA on them.
|
||
1995 SNOB GT-40
|
||
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |