79 nautique rebuild

Almost completely stripped, the floor and foam are removed to the bow eye.
Next week it goes onto the cradle to get the stringers cut out.

and of course i cant figure how to attach pictures.

Need some dimensions and an opinion.
1. Rear seat bench bottom box location and height.
as in how far from either the transom or the glass panel is the front of the rear bench.
2. Opinions on battery location, id like to build a split rear bench with the battery in the middle. It would be just off the hull bottom between the shaft log and strut.
That area would be used as a step to get on/off the swim platform.

I also have a cracked windshield port side if you guys can point me to source for that.
Thank you

Sorry, i dont know how to pm or post pics on this site.

The icons dont do what they do on the other boat forums im on.

How much for the glass?
Thank you

Keno thank you,
I have a galaxy tablet that i either use to take pictures or another camera with a micro sd then inserted into the tablet.

On another site for different type of boats i have 100 or so pics of that rebuild posted so i am 99 percent certain the image size is not a problem.

The picture icons here on correctcraft either ask for a http and the other icon turns on the tablet camera.

Thank you

Update:
The boat is off the trailer and blocked up on a combo cradle and jacks.
9 in all at 3 stations: transom, 5 1/2 ft, 11 ft.
There is also 3 water levels on the boat and it is nice and sqaure.

Marine ply, vynil-ester 700 resin and 1708 biax material are all here.

The only piece of dry wood (mostly dry, some staining) on this boat was the
at the rudder port, i cut it out because the wood directly above it for the stern lifting eye has been dripping water right till today, it came off in one piece.

There are alot of pictures that will be posted hopefully in a few weeks.

http://www.uscomposites.com/polyesters.html

vynil-ester 700

sir, i am strictly an amature

+1 on epoxy. It also plays well with CPES coated wood

I certaintly appreciate the avdice and fast replies.
Absolutely agree on what your saying about the poly
i mix ve with a timer and it still sometimes acts funny.

I’m confused. Going to PN to see pics of your restoration. Can you put pics on here too CCFAN

67 ski nat wrote: I’m confused. Going to PN to see pics of your restoration. Can you put pics on here too CCFAN

So. Longhorn and fishy Jeff are over there too
So PN added to home screen

cant go to the link........Pete or KENO fix please?

Thanks Pete. It’s a worthy project

If you're looking for black letters on a white background click on the link below for Stan C contact info.

Thank you to the members who directed me to stan, the emblems arrived today and are really 1st rate work.