PCM 351 Parts Scotland!

Hey Guys

Looking for the following parts, shipped to scotland...I guess the only seriously priced bit is the exhaust manifold itself, any advice on the riser bolts appreciated.

email from marina:



Please find below the list of parts needed to rebuild the engine:



1 x Carburettor Repair Kit - http://www.skidim.com/prodinfo.asp?number=RN0120-1

1 x Exhuast Manifold - http://www.skidim.com/prodinfo.asp?number=R028001

8 x Manifold Bolts - http://www.skidim.com/prodinfo.asp?number=RS3945

1 x Exhaust Manifold Gasket - http://www.skidim.com/prodinfo.asp?number=RM0007

1 x Exhaust Riser Gasket - http://www.skidim.com/prodinfo.asp?number=RM0002



We would also need 4 bolts for the riser which I could not see on the website. We may be able to source these locally, however I would suggest that you pose the question on the forum. These may be available seperately, although with the number of items you are ordering, they may be able to advise a suitable service kit instead.

Hi boat dr

As far as I know the marina had to drill through the bolts on the manifold as they had become corroded, in attempts to replace a leaky gasket. While doing this they cracked the manifold itself.

Sorry for my lack of terminology (I am just going on what the marina are saying), but is your set all that I would need, so only needing the carb rebuild kit from skidim ?

Cheers

Gareth

address would be:

Caledonian Marine Ltd, Rhu Marina, Pier Road, Rhu, Helensburgh, Scotland G84 8LH