Boats For Sale:
Ski Platform |
Post Reply 
|
Page <12 |
| Author | |
8122pbrainard 
Grand Poobah 
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: July-08-2010 at 9:26pm |
Randall, I highly recommend you unscrew the wood from the brackets and bring it inside. Besides getting it to dry out, you'll be able to do a better job of cleaning and oiling around the edges. Also, there have been reports of the teak oil screwing up or staining the gel coat of the boat. You won't have to worry about any masking or having the oil run down the transom. |
|
 |
|
|
horkn
Platinum Member 
Joined: September-10-2007 Location: Cedarburg, Wi Status: Offline Points: 1511 |
Post Options
Thanks(0)
Quote Reply
Posted: July-08-2010 at 10:35pm |
|
Pete, Teak oil will stain the gel coat.
At some point someone got some teak oil on my gel coat right near where the platform attaches. |
|
|
78 martinique- refloored, reinforced, stringers re glassed, re engineered interior
GT40P heads Edelbrock Performer intake acme 4 blade http://img.photobucket.com/albums/v64/horkn/fish/nautique.jpg |
|
|
|
|
coach'80
Senior Member 
Joined: September-25-2008 Location: North Texas Status: Offline Points: 174 |
Post Options
Thanks(0)
Quote Reply
Posted: July-09-2010 at 12:39am |
|
i did take mine off before i started anything. it looks so much better already. i have done three coats of bleach and power washing it off. i do have a couple of spots where i was careless with the resin while i was glassing. i guess i will have to lightly sand them? any suggestions?
|
|
|
1980 Ski new project
1994 Ski (sold) |
|
|
|
|
Donald80SN
Grand Poobah
Joined: January-12-2009 Location: Denver, NC Status: Offline Points: 3902 |
Post Options
Thanks(0)
Quote Reply
Posted: July-09-2010 at 12:46am |
|
Yes, Sand off the resin. Just the resin try not to remove much wood.
Donald |
|
|
|
|
coach'80
Senior Member
Joined: September-25-2008 Location: North Texas Status: Offline Points: 174 |
Post Options
Thanks(0)
Quote Reply
Posted: July-09-2010 at 1:21am |
|
cool. thanks. does it need to dry in the sun? it has only been able to be in the sun a few hours because of the rain. but it has been drying for 48 hours. is that long enough? then i can sand and oil right?
|
|
|
1980 Ski new project
1994 Ski (sold) |
|
|
|
|
81nautique
Grand Poobah
Joined: September-03-2005 Location: Big Rock, Il Status: Offline Points: 5817 |
Post Options
Thanks(0)
Quote Reply
Posted: July-09-2010 at 10:17am |
|
Sorry Coach but if you sand now you have to wash it again. You can't leave the dust from sanding clogging up the pores of the wood. That's why I use the wide fan on a power washer as my last step. Then let it dry, a little sun is ok but 2 days drying out of the sun is probably ok too. If the joints between the lengths of wood appear dry then the rest of it is.
|
|
|
You can’t change the wind but you can adjust your sails
|
|
|
|
|
coach'80
Senior Member
Joined: September-25-2008 Location: North Texas Status: Offline Points: 174 |
Post Options
Thanks(0)
Quote Reply
Posted: July-09-2010 at 10:24pm |
|
no problem. thanks for the pointer. i will get it sanded today. it has not stopped raining all day and right now we are getting hammered.
|
|
|
1980 Ski new project
1994 Ski (sold) |
|
|
|
|
Post Reply
|
Page <12 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
coach'80 wrote: