Raw water pump identification |
Post Reply |
Author | |
800wildcat
Senior Member Joined: July-05-2010 Location: Ripon, WI Status: Offline Points: 121 |
Post Options
Thanks(0)
Posted: July-29-2019 at 7:41pm |
Can anyone help identify this raw water pump and perhaps point towards where to get a rebuild kit for it? Or another pump? Has number 908920 cast into the backside, appears to be an OMC. Came off a '75 SkiTique with a SBC. It's mounted on the lower left side of the engine block when viewed from the front of the engine. Don't know boat's history past about the last 7 years other than the engine was replaced about 6-9 years ago so have no idea if pump is stock. Back plate has a fairly deep gouge and couldn't find key for impeller and metal bushing inside impeller rotates free of impeller, so need a few replacement parts.
|
|
KENO
Grand Poobah Joined: June-06-2004 Location: United States Status: Offline Points: 11061 |
Post Options
Thanks(1)
|
swilliams
Senior Member Joined: June-26-2016 Location: Cincinnati,Ohio Status: Offline Points: 236 |
Post Options
Thanks(0)
|
Omc. Rebuilt the one I have on the motor now. Seals, impeller and bearing can be found but a lot of cross referencing took place to find them. You will have to make your own gaskets. Best choice would be to invest in a crank mounted pump. I won’t rebuild another one for sure!
|
|
1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc.
|
|
800wildcat
Senior Member Joined: July-05-2010 Location: Ripon, WI Status: Offline Points: 121 |
Post Options
Thanks(0)
|
Found a bearing and impeller, but nothing else so far. Would be nice to find a seal although the old one does not yet leak and it would be really nice to find the steel plates.
|
|
swilliams
Senior Member Joined: June-26-2016 Location: Cincinnati,Ohio Status: Offline Points: 236 |
Post Options
Thanks(0)
|
I will look for the number on the seals I found. Plates could be very hard to find but a tool and die shop could probably fabricate them.
|
|
1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |