Refinishin wood swim platform

If you put oo much oil on the platform and it is still sticky the next day, wipe it down with straight mineral spirits. Will dry with the nice unshiny yet smooth look you want. Went into panic mode when my platform was shiny and still sticky 24 hrs. later!

DrCC wrote: Oil finishes were meant to be "Rubbed-In".

Exactly, excess will simply not get absorbed and will gel on the surface.

Here's a trick that I may take some heat for but I cut my first 2 coats of oil with a little mineral spirits to make it thinner. I feel it penetrates the old wood deeper. After 2 coats I then apply oil straight from the bottle. I always brush on, wait 5 minutes, rub in. I try to go at least a few days and more when I have the time, between coats.

[/QUOTE]

Thanks Pete, Don't know why I love coming back to this thread.

Apparently I need to be more careful when browsing these forums at work...

Same here...Almost got busted.

Can I share my teak job?

Our platform was in pretty good shape, just dry. So...I just slapped some of this on it. (we have been using the same stuff for years) Love the color it brings. Coat two went on the top last night...not sure if it'll need another one or not.

We used the sealer on the 90. Worked great for a long time but now it's starting to come up in a couple places, by come up I mean look patchy I guess. I'd love to strip it and re-teak oil it.

Had a pair of my favorite Cypress Gardens Mustang combo skis in the ski locker of a buddy's sport. His tranny was leaking a smidge and the water/oil soaked my skis for a while without our knowledge. Best thing to ever happen to the skis. They look new and are super waterproof lol

Oh and the boats fixed too.

I just put one full coat on mine today. A pressure washer was my choice of cleaning. I put it in the sun today and it soaked up a 1/3 a bottle or starbite teak oil. Mine looks dark but lighten up as it dried.

It is going to look sweet on the boat. I'm ready for the water!!!

I used the starbrite teak oil restoration kit and it worked awesome. You should have seen the dirt and filth coming off after I used the cleaning step. It really brought it back to life but I used the whole bottle of teak oil and had to buy another, a total of 6 coats. Its been holding for a few weeks. I will probably give it one more again before I take it out.

Thanks for all the pics and specific product results. Wish I found this thread a few weeks ago. I used the Te-Ka brand stripper and brightener, and I LOVED how that worked. The problem is that I chose the Daily's hard-drying teak oil. While it looks just gorgeous in the garage, I do fear it's going to lift and such over the season. I'm not planning on stripping it off for this season (yet) but even before finding this forum and thread, after seeing the completed result, I was wishing I had chosen a true 'oil'. I could certainly see a use for the Daily's product (I'm not ripping it) just not for a swim step.

Also, my swim step is the more trapezoid shape, with no open slots in it, and the underside is separating and cracking. I actually expect to have to rebuild it soon, maybe this coming winter.

Live and learn,

PE